What’s The Best Table Saw? Top 9 Revealed

If you are a handyman, a constructor, a carpenter, or even just a DIY homeowner, you may find yourself in need of a table saw. This tool allows you to cut large sheets of material with precision and ease, something that miter saws or small chainsaws cannot do. If you need accurate measurements for sheets of wood, aluminum, or even plastic for your project, then its important that you have the best table saw for the job. This can help you finish jobs involving cabinetry, house siding, wood trim, and much more.

Because there are so many types and models of table saws available, it can be time-consuming to find one. But don't worry! We have compiled a list of the 9 best table saws for your convenience and ease. This article will answer some commonly answered questions and narrow down the field for you.

Table Saw FAQ

1. What Is a Table Saw?

2. What Do Table Saws Do?

3. How Do Table Saws Work?

4. Where Can You Buy Table Saws?

How We Reviewed

We reviewed the following table saws based on their features, pros and cons, price, and where they can be bought. We conducted extensive research on both the types of table saws as well as the best-reviewed models for each category. Afterward, we were able to compile a list of the top 9 best table saws.

Overall Price Range of the Best Table Saws

Table saws typically cost anywhere from around $ to around $$$. Some can be more expensive because they come with features that may not be present in lower priced models, such as flexible miter gauges, higher rip capacity, crosscut sleds, tenon jigs, and attached splitters/riving knives. Depending on your personal needs, you can decide which features would best benefit you and fit into your budget.

What We Reviewed

  • Bosch 10-Inch Portable Jobs​ite Table Saw GTS1031
  • DeWalt DWE7480XA 10-Inch Portable Table Saw
  • DeWalt DWE7491RS 10-Inch Jobsite Table Saw
  • Bosch 10-Inch Worksite Table Saw 4100-09
  • SKIL 3410-02 10-Inch Table Saw
  • Shop Fox W1819 3 HP 10-Inch Table Saw
  • SawStop PCS31230-TGP236 3-HP Professional Cabinet Saw
  • Hitachi C10RJ 10" 15-Amp Jobsite Table Saw
  • Delta Power Tools 36-6022 Jobsite Saw

Bosch 10-Inch Portable Jobsite Table Saw GTS1031

No products found.

4 out of 5 stars

Features

First on our list of best table saws is the Bosch Portable Jobsite Table Saw GTS1031, with a 10" 24-tooth carbide blade and a powerful 15-Amp engine with a no-load speed of 5,000 RPM. It has a rip capacity of 18 inches, which means it can cut through medium-large sheets of material like hardwoods, flooring, plywood, shelving, and lumber. It can cut as deep as 3-1/8" at a right angle and as deep as 2 1/4" at a 45-degree angle. It is built around an all-steel base, making it durable, and weighs 52 pounds, making it light enough to be portable.

This saw has many great safety features, such as a Squarelock rip fence for easy adjustment, onboard storage, an attached riving knife, anti-kickback pawls, and a blade guard that can be attached to the riving knife. These are all modular, meaning you can place and remove them easily when needed. It also has great additional features such as a 2" dust collection port, a slot to attach your in-shop vacuum, wrenches, a push stick, a rip fence, and a miter gauge.

Price

This product can be found on Amazon for around $$.

Pros

  • Great safety and additional features
  • Portable and durable
  • Powerful engine for many applications
  • Easy to use

CONS

  • Lever can be stiff to operate.
  • Loud engine

DeWalt DWE7480XA 10 in. Portable Table Saw

No products found.

4.5 out of 5 stars

Features

Second on our list of best table saws is the DeWalt DWE7480XA Portable Table Saw, with a 10", 24-tooth carbide blade and a powerful 15-Amp motor that provides a no-load speed of 4,800 RPM. The rip capacity is a little under 24.5 inches and the blade allows you to make bevel cuts with a range of 0 to 45-degrees. It is equipped with a rack and pinion fence system for flexibility and accuracy, a Site-Pro Modular Guarding System for easy tool-less adjustment, and onboard storage for accessories.

It is lightweight compared to other table saws, weighing only 56 pounds and measuring 26.5 x 25.8 x 17.5 inches. It comes with accessories such as a miter gauge, a push stick, a hardware bag, and a blade guard. It has a heavy-duty stand made of steel tubes which can adjust to work even on uneven surfaces, a low-friction coating, and a 2.5-inch dust collection port that can be attached to your vacuum.

Price

This product can be found on Amazon for around $$ with the folding stand included.

Pros

  • Portable and durable
  • Great features
  • Powerful engine for multiple applications
  • High rip capacity and strong blades

CONS

  • Short in-feed length
    Flat-track miter gauge
  • Flat-track miter gauge
  • Difficult on-off button

DeWalt DWE7491RS 10-Inch Jobsite Table Saw

No products found.

4.6 out of 5 stars

Features

Third on our list of best table saws is the DeWalt DWE749IRS Jobsite Table Saw, with a 10" blade and a 15-Amp engine. It weighs 110 pounds and the table measures 26 x 22 inches. It has a large ripping capacity of 32-1/2" with a rail extension to help with handling these larger cuts. It can make cuts with a depth range of 3-1/8" at 90-degrees to 2-1/4" at 45-degrees. It has a ripping fence with flip-over action, a rack and pinion fence, Power Loss Reset with an electronic power switch, and a 2-1/2" dust port that can be hooked up to your vacuum.

Price

This product can be found on Amazon for around $$.

Pros

  • Large ripping capacity
  • Power Loss Reset safety feature
  • Powerful engine

CONS

  • Heavier than other job site table saws
  • No onboard storage
  • Confusing to assemble

Bosch 10-Inch Worksite Table Saw 4100-09

No products found.

4.5 out of 5 stars

Features

The Bosch Worksite Table Saw 4100-09 is fourth on our list of best table saws, with its 10" 40-tooth carbide blade and a 15-Amp motor that rotates at 3,650 RPM. It has a rip capacity of 25 inches with a weight of 60 pounds, and the aluminum table measures 29 x 21.5 inches, making it perfect for larger sheets.

It has an easily adjustable blade height and can make bevel cuts with a range of 0 and 45 degrees. It includes safety features such as an arbor lock mechanism and a Smart Guard System with a modular blade guard, riving knife, and anti-kickback pawls. Some additional features include a Squarelock Rip Fence, onboard storage with hangars, a dust collection port, and a gravity-rise stand.

Price

This product can be found on Amazon for around $$.

Pros

  • Great safety and additional features
  • Large table size
  • Good rip capacity and portability

CONS

  • Miter gauge does not fit the best

SKIL 3410-02 10-Inch Table Saw

No products found.

3.9 out of 5 stars

Features

Fifth on our list of best table saws is the SKIL 3410-02 Table Saw, featuring a 10" 28-tooth carbide blade and a 15-Amp engine with an amazing spinning speed of 5,000 RPM. It is made out of heavy-duty steel and weighs 67 pounds. It has a 20" x 26" cast aluminum table that extends to 10" x 32" for longer pieces of work, and a rip capacity of 12" to the left and 24-1/4" to the right.

The blade depth can reach 3-1/2" at a right angle and 1-1/2" at a 45-degree angle, with a bevel range of 0 to 47-degrees left and right. Some features include a foldable stand, a self-aligning rip fence, onboard storage, a riving knife, and a blade guard with a quick disconnect mechanism.

Price

This product can be found on Amazon for around $.

Pros

  • Easy for beginners to operate
  • Cheap and durable

CONS

  • Foldable stand does not include wheels
  • No dust collection system
  • May be difficult to use miter gauge

Shop Fox W1819 3 HP 10-Inch Table Saw

No products found.

4.3 out of 5 stars

Features

Sixth on our list of best table saws is the Shop Fox W1819 Table Saw, with a 10" blade depth and a 12.8-Amp, 3.0 horsepower engine that delivers a maximum of 3,450 RPM. It is made out of heavy cast iron with a cast iron table and wings. Because of this, it weighs 537 pounds, making it solely for stationary use. It has a maximum cut depth of 3-1/8" at 90-degrees and 2-3/6" at 45-degrees, with a maximum rip of 29-1/2" to the right 13-1/2" to the left and a blade tilt of 0 to 45-degrees.

Some features include a T-slot miter gauge, a flip stop, a 4" dust port, cast iron trunnions, and a Camlock T-shaped Fence. Safety features include a quick-release riving knife, blade guard, splitter, and a magnetic switch with thermal overload protection.

Price

This product can be found on Amazon for around $$.

Pros

  • Powerful engine
  • Great safety features
  • Hybrid for multiple applications

CONS

  • Expensive
  • Heavy and bulky
  • Flimsy miter gauge

SawStop PCS31230-TGP236 3-HP Professional Cabinet Saw

No products found.

4 out of 5 stars

Features

The seventh table saw on our list of best table saws is the SawStop PCS31230-TGP236 3-HP Professional Cabinet Saw, which can house either a 10" 40-tooth combination blade or 8" dado sets and a 13-Amp, 3.0 horsepower engine. It has a maximum cut depth of 3-1/8" at a right angle and 2-1/4" at 45 degrees. It is a stationary table saw, weighing 150 pounds with dimensions of 69 x 33 x 34 inches, and comes with an extension for larger projects.

Some features include quick-change riving knives, anti-kickback prawls, and blade guards as well as a specially designed 99% dust collection system with a 4" port and the 36" T-glide fence system.

The most outstanding features about this table saw are its safety features, one of which includes an electronic detection system that can pick up on contact between a human being and the blade. Once it does, it sends a signal to the saw, causing it to adjust itself and activating a fast-acting brake that stops the blade immediately. Another is the main power switch with a lockout key and the ability to be activated with the knee for easy starting and stopping.

Price

This product can be found on Amazon for around $$$.

Pros

  • Excellent safety features
  • Powerful with ability to change types of blades
  • T-Glide fence system provides precise measurements and cuts

CONS

  • Expensive
  • Bulky and heavy

Hitachi C10RJ 10" 15-Amp Jobsite Table Saw

No products found.

3.6 out of 5 stars

Features

The Hitachi C10RJ Jobsite Table Saw is eighth on our list of best table saws, with a 10" 40-tooth tipped carbide blade and its powerful 15-Amp engine that produces a spinning speed of 4,500 RPM. It has a depth cut range of 3'1/8" at 0 degrees and 2-1/4" at 45-degrees, with a bevel range of 0 to 45 degrees.

It includes a telescoping table extension, which gives it a large ripping capacity of 35" to the right and 22" to the left. The 28'3/4" working tabletop has out-feed support of 26-3/4" and a 13/16" dado capacity for simple dado cuts.

Some features include onboard storage, a fold-and-roll stand, a blade guard, anti-kickback pawls, push stick, and wrenches. It also includes safety features such as overload protection and riving knives.

Price

This product can be found on Amazon for around $$.

Pros

  • Large ripping capacity
  • Powerful engine
  • Onboard storage and wheeled stand for easy transport

CONS

  • Heavy to transport at 96 pounds
  • Needs adjustment out of the box
  • Service and reliability issues

Delta Power Tools 36-6022 Jobsite Saw

No products found.

2.7 out of 5 stars

Features

The ninth and final table saw on our list of best table saws is the Delta Power Tools 36-6022 Jobsite Saw, which has a 10" blade depth and a powerful 15-Amp engine that provides a maximum of 5,000 RPM. It has a maximum cutting depth of 3-1/2" and 2-1/2" at 45 degrees, with a maximum rip capacity of 30" to the right and 7-1/4" to the left and a maximum left blade tip of 45-degrees.

It is also compatible with the 8" dado stack at a maximum width of 13/16-inches. The aluminum table top measures 19.56" wide and 26" deep and has a right-side table extension and anti-friction coating. It has a large stand for easy portability and weighs 75 pounds.

The saw itself has a one-piece framework design, integrating the saw's base design into the large wheeled stand for easy portability, and it weighs 75 pounds. Some features include a 2.5" dust collection port that can be connected to your vacuum, a T-style rip fence, a tool-free split-guard design, an out-feed support extension, a riving knife, and anti-kickback prawls.

Price

This product can be found on Amazon for around $$ with the stand included.

Pros

  • T-style rip fence
  • Powerful engine
  • Portable with good features

CONS

  • Rip fence not always stationary
  • Must buy new replacement parts if broken

The Verdict

Based on our research and reviews, we picked the Bosch 10-Inch Worksite Table Saw 4100-09 as the best table saw. It has great features, such as a powerful motor, high rip capacity, anti-gravity stand, onboard storage, and a SafeGuard System. It is also affordable and user-friendly, which makes it great for professionals and easy enough for beginners to use with a little practice. If you're looking for a great table saw, then we strongly recommend the Bosch 10-Inch Worksite Table Saw 4100-09.

Robert Martinez
 

Robert writes electronics, tools and home improvement related articles. Robert lives in New York City and is tall for no reason. In real life, Robert is afraid of basements, bees, and going up stairs when it is dark behind her. Let’s face it...

Click Here to Leave a Comment Below 0 comments

Leave a Reply: